How to hack wifi 100% Working Android Device

0
With this app you’ll can connect to WiFi networks which have WPS protocol enabled. This feature was only available in version 4.1.2 of Android.
App developed with educational purposes. I am not responsible for any misuse.

WPS Connect is focused on verifying if your router is vulnerable to a default PIN. Many routers that companies install own vulnerabilities in this aspect. With this application you can check if your router is vulnerable or not and act accordingly.

Includes default PINs, as well as algorithms such Zhao Chesung (ComputePIN) or Stefan Viehböck (easyboxPIN).

Wi-Fi Protected Setup™ (WPS) is a feature that lets you easily connect WPS-supported client devices, such as wireless printers, to your router wirelessly. This article will provide three (3) methods that you can follow depending on what client device you are using to connect to the router through the WPS feature.
Connecting a device using the WPS button
Connecting a device using its WPS PIN
Connecting a device using the router’s WPS PIN
NOTE: The Wi-Fi Protected Setup™ configures one device at a time. The WPS button is located either on the front or back panel of your Linksys device. Some Wireless-G routers may not have a WPS feature. Refer to your product documentation for the detailed features of your router.

Connecting a device using the WPS button
Use this method if your client device has a
WPS button or if it prompts you to press the WPS button on your router.

Step 1:
Locate and press the WPS button on your router. Alternatively, you can access your router’s web-based setup page and configure WPS from there by just clicking on the same

WPS button found on the first item. To access your router’s web-based setup page, open any web browser (Internet Explorer, Mozilla Firefox, or Safari®) and enter “192.168.1.1” on the Address bar then press [Enter] . You will be asked for your log-in details. Leave the User name field blank and enter “admin” on the Password field then click OK .

Step 2:
Within two (2) minutes , click the WPS button on the client device that you want to connect to the router’s wireless network.

NOTE: 
To learn how to use the WPS feature on your client device, refer to its documentation.

Your device should now be connected to your router wirelessly using WPS. If you encounter problems with the WPS setup such as Connection Failure! Your client device failed to connect to the network. Refer back to your client device for further instructions. Press “OK” to continue. , you may manually configure your router’s wireless settings. For instructions, click here .
Connecting a device using its WPS PIN Use this method if your client device has a WPS Personal Identification Number (PIN) . This method assumes that you already have your client device’s PIN. If you’re not sure where to get your client device’s WPS PIN, refer to its product documentation.

Step 1:
Access your router’s web-based setup page. Open any web browser (Internet Explorer, Mozilla Firefox, or Safari®) and enter “192.168.1.1” on the Address bar then press [Enter] .

Step 2:
You will be asked for your log-in details. Leave the User name field blank and enter “admin” on the Password field then click OK .

Step 3:
Click Wireless > Wi-Fi Protected Setup™ .

Step 4:
Enter your client device’s PIN in the blank field then click the Register button.

After the configuration process, your device should now be connected to your router wirelessly using WPS. If you encounter problems with the WPS setup such as

Connection Failure! Your client device failed to connect to the network. Refer back to your client device for further instructions. Press “OK” to continue. , you may manually configure your router’s wireless settings. For instructions, click here .

Tested on:
– LG G2
– Nexus 5
– Samsung Galaxy S3

IMPORTANT!!
Prior to an assessment, understand that it serves the application.


Many of friends asking , massaging About How To Hack Wi-Fi? , How To Hack Wi-Fi password? in Android.

Recently i have Posted About


How To Root Any Android Phone Using KingRoot Application-Just One Click And Rooting 


Now we are back with Wifi hacking trick.
#METHOD 1


MrKhan image
HACK WiFi using WiFi Wps Wpa tester :

Requirements:
-Rooted Android Device (4.0 recommend)


Steps To Use wps tester:-

•Just download and Install this app From Here

WPS_Connect_v1.2.2_0.apk

•Make Sure You Have Enabled The Unknown Sources In Settings/

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.